Sound-like waves are routinely used to image the subsurface, but mostly well below the ultra-sound band.

Several methods involve sound-like vibrations:

• Reflection seismic— the most important subsurface remote sensing tool we have
• Refraction seismic——重要的是,但利基,有很多通讯on with reflection
• Acoustic logging(uses— usesultrasound, which you specifically asked about)

What do you mean, 'sound-like'?

I say 'sound-like', because we normally think of sound as a vibration that we can hear, conducted through air or maybe water or building materials. In seismic methods — such as we might use prospecting for minerals, oil and gas, water, geothermal resources, etc. — we use very low frequencies, typically in the 4–256 Hz range (about 6 octaves). You can certainly hear some of these frequencies, but not those below about 20 Hz, which are often the strongest frequencies in our signal.

Why is seismic reflection such a big deal?

From thousands of field recordings, usually shot in a grid over a land or marine area, we can reconstruct an image of the subsurface using a process calledtomography. The data might be 2D (a vertical cross-section) or 3D (a volume, analogous to a CAT scan). In some cases, this image is excellent and reveals a great deal about the geology of the region. Here's an example from a paper byMoore et al. (Science, November 2007):

How much can you see?

A large survey might be hundreds of square kilometres, or many tens of kilometres long in the case of 2D data. We can imagewelldown to about 6–8 km, and we can imagesomethingdown to about 20 km. The typical resolution of seismic is on the order of tens of metres horizontally and a few metres vertically (about a quarter of a wavelength). This is much better than gravity or magnetics. You might think, "Why not use higher frequencies for imaging — surely you'd see more?" Yes! We would love to use ultrasound (say) for imaging. The problem is that high frequencies are absorbed more efficiently by the medium (mostly rock and water) and actually heat it up very slightly.

What can you find out with sound?

In many cases, we can go beyond an image of the subsurface and deduce some physical properties of the earth, especially the speed of sound in the rock and the density of the rock. Sound reflections depend on changes inacoustic impedance, and aredependenton the incidence angle, so all the physics really stems from that relationship.

What about acoustic logging?

Acoustic logging or sonic logging是一个重要的与地震成像,是吗cause the logs — run along a borehole using special tools — are the best link between the acoustic properties of the rock. They thus link us to the seismic image that depends on those acoustic properties. So we don't image anything with this data, because it's one dimensional, but it's a key calibration point. Acoustic logging does use ultrasound in the 20 kHz range, but the attenuation issue is not a problem in the vicinity of the borehole.